TFM debut John Deere T6 700 combine
Alongside displaying models from the new 6M tractor series, John Deere dealers Templetuohy Farm Machinery (TFM) gave visitors the opportunity to see the first of John Deere’s latest T6 combines to arrive here in Ireland. The latest T6 models replace the current T600 generation.
The model in question was the T6 700, the second largest six-walker machine, which is fitted with a 421hp JD9X 9l engine. A 11,000l grain tank is offered as standard, while a larger 13,500l alternative is optionally available. The unloading auger has a maximum unload speed of 150l/second via the adjustable spout.
The new T6 models inherit the same cab as that found on the larger X9 series combines along with the integration of the CommandPro joystick and G5 Plus CommandCenter 12.8in displays. All machines are Greenstar ready from factory.
Ground speed automation is another feature available, which continuously evaluates inputs and helps to maintain a consistent feed rate by adjusting the combine’s ground speed based on variables such as grain loss and engine power, etc. The feeder house has been widened to 167cm to match the drum width. Otherwise, the threshing system is unchanged to before.
The new T6 700 is expected to be demonstrated throughout the coming harvest season.
Kellys display new VT self-propelled sprayer.
Kellys displays new VT self-propelled sprayer
Irish Horsch distributor, Kellys demonstrated the brand’s latest VT self-propelled model at the event. The exact model in question and attracting plenty of attention was the VT 6.230.
It is fitted with a 6,000l spray tank and 500l clean water tank along with the manufacturers own CCS Pro cleaning system, offering variable speed suction and agitation speeds.
The model demonstrating was fitted with a 30m triple fold aluminium boom and a 2/1 nozzle system, which sees four nozzle every 50cm spacings and a bank of three nozzles at 25cm spacings. It also featured Horsch’s Autoselect nozzle system whereby up to three nozzles can work together to achieve a desired application rate suitable to its forward speed without compromising on pressure.
Autoselect Pro curve compensation and hill control pro chassis levelling were just some of the machines other standout feature.
Track width is also adjustable from 1.8m to 2.4m. Meanwhile, the machine is powered by a 230hp FPT engine and 50km/h hydrostatic transmission.
The cab is the latest variant from Claas which is said to be quieter and more spacious than before, which improvements in terms of control layout.
Atkins display high capacity Bredal F4 mounted spreader.
Atkins displays Bredal F4 mounted spreader
Atkins Birr, the Irish distributor for the Bredal and Bogballe fertiliser spreader brands, showcased a wide range of machines, including Bredal’s F4 high-capacity mounted spreader. The F4 is designed to spread at large bout widths of up to 40m without compromising on accuracy. The spreader features a heavy-duty chassis and hopper, and is offered as an alternative to those not requiring the capacity of a trailed machine.
The F4 features a unique fully stainless-steel hopper which has a carrying capacity from 1,500l to 4,000l. Following a similar principal to its trailed machines, fertiliser is metered by a pair of 200mm-wide feed belts, which work independently of each other. Headland section control is offered as standard. Both 800mm discs are hydraulically driven via load-sensing hydraulics. Section control is achieved by altering disc speed and fertiliser drop point onto each disc. The F4 is fully Isobus controlled.
Behind the double disc rows is a set of straight discs which run inline with the rear coulters or fertiliser coulter if setup to do so.
Bednar shows cultivation and drilling wares
Czech manufacturer, Bednar exhibited for the first time at the event, supported by members of its newly appointed Irish dealer network. On display was a Swifterdisc XN 3000 3m disc harrow, a Terraland TN 3000 chisel plough and the Omega OO 4000L seed drill.
The Omega trailed drill range prides itself on flexibility and versatility. It features a pressurised 4,000l plastic hopper.
Upfront is a double row of 460mm discs, arranged in an ‘X’ configuration to reduce the minimum power requirement, as the lateral forces of the offset discs effectively cancel each other out.
Behind the double disc rows is a set of straight discs which run in line with the rear coulters or fertiliser coulter, if set up to do so. This is then followed by a row of staggered tyre packers. Next, are rubber track eradicators and the seeding bar. Double disc coulters are standard, each mounted on a parallelogram for even seed placement regardless of field contours. Coulter pressure is 140kg. Row spacing is optional at 12.5cm or 16.7cm.
Calibration is said to be simple with an outlet hose piped to the rear of the machine to avoid climbing in underneath the hopper. All toolbars can be independently raised and lowered from inside the cab.
TFM debut John Deere T6 700 combine
Alongside displaying models from the new 6M tractor series, John Deere dealers Templetuohy Farm Machinery (TFM) gave visitors the opportunity to see the first of John Deere’s latest T6 combines to arrive here in Ireland. The latest T6 models replace the current T600 generation.
The model in question was the T6 700, the second largest six-walker machine, which is fitted with a 421hp JD9X 9l engine. A 11,000l grain tank is offered as standard, while a larger 13,500l alternative is optionally available. The unloading auger has a maximum unload speed of 150l/second via the adjustable spout.
The new T6 models inherit the same cab as that found on the larger X9 series combines along with the integration of the CommandPro joystick and G5 Plus CommandCenter 12.8in displays. All machines are Greenstar ready from factory.
Ground speed automation is another feature available, which continuously evaluates inputs and helps to maintain a consistent feed rate by adjusting the combine’s ground speed based on variables such as grain loss and engine power, etc. The feeder house has been widened to 167cm to match the drum width. Otherwise, the threshing system is unchanged to before.
The new T6 700 is expected to be demonstrated throughout the coming harvest season.
Kellys display new VT self-propelled sprayer.
Kellys displays new VT self-propelled sprayer
Irish Horsch distributor, Kellys demonstrated the brand’s latest VT self-propelled model at the event. The exact model in question and attracting plenty of attention was the VT 6.230.
It is fitted with a 6,000l spray tank and 500l clean water tank along with the manufacturers own CCS Pro cleaning system, offering variable speed suction and agitation speeds.
The model demonstrating was fitted with a 30m triple fold aluminium boom and a 2/1 nozzle system, which sees four nozzle every 50cm spacings and a bank of three nozzles at 25cm spacings. It also featured Horsch’s Autoselect nozzle system whereby up to three nozzles can work together to achieve a desired application rate suitable to its forward speed without compromising on pressure.
Autoselect Pro curve compensation and hill control pro chassis levelling were just some of the machines other standout feature.
Track width is also adjustable from 1.8m to 2.4m. Meanwhile, the machine is powered by a 230hp FPT engine and 50km/h hydrostatic transmission.
The cab is the latest variant from Claas which is said to be quieter and more spacious than before, which improvements in terms of control layout.
Atkins display high capacity Bredal F4 mounted spreader.
Atkins displays Bredal F4 mounted spreader
Atkins Birr, the Irish distributor for the Bredal and Bogballe fertiliser spreader brands, showcased a wide range of machines, including Bredal’s F4 high-capacity mounted spreader. The F4 is designed to spread at large bout widths of up to 40m without compromising on accuracy. The spreader features a heavy-duty chassis and hopper, and is offered as an alternative to those not requiring the capacity of a trailed machine.
The F4 features a unique fully stainless-steel hopper which has a carrying capacity from 1,500l to 4,000l. Following a similar principal to its trailed machines, fertiliser is metered by a pair of 200mm-wide feed belts, which work independently of each other. Headland section control is offered as standard. Both 800mm discs are hydraulically driven via load-sensing hydraulics. Section control is achieved by altering disc speed and fertiliser drop point onto each disc. The F4 is fully Isobus controlled.
Behind the double disc rows is a set of straight discs which run inline with the rear coulters or fertiliser coulter if setup to do so.
Bednar shows cultivation and drilling wares
Czech manufacturer, Bednar exhibited for the first time at the event, supported by members of its newly appointed Irish dealer network. On display was a Swifterdisc XN 3000 3m disc harrow, a Terraland TN 3000 chisel plough and the Omega OO 4000L seed drill.
The Omega trailed drill range prides itself on flexibility and versatility. It features a pressurised 4,000l plastic hopper.
Upfront is a double row of 460mm discs, arranged in an ‘X’ configuration to reduce the minimum power requirement, as the lateral forces of the offset discs effectively cancel each other out.
Behind the double disc rows is a set of straight discs which run in line with the rear coulters or fertiliser coulter, if set up to do so. This is then followed by a row of staggered tyre packers. Next, are rubber track eradicators and the seeding bar. Double disc coulters are standard, each mounted on a parallelogram for even seed placement regardless of field contours. Coulter pressure is 140kg. Row spacing is optional at 12.5cm or 16.7cm.
Calibration is said to be simple with an outlet hose piped to the rear of the machine to avoid climbing in underneath the hopper. All toolbars can be independently raised and lowered from inside the cab.
This is a subscriber-only article
SHARING OPTIONS: